After cooling the wort is oxygenated to increase yeast activity and to start the fermentation process. To ensure the necessary air or oxygen supply into the wort stream we have developed an aeration unit that is an innovative concept compared with other conventional aeration systems. Our unit treats the wort gently and works efficiently.

In our special designed geometry the wort causes a very fine spreading of oxygen bubbles. On the way to the fermentation area the small bubbles can react with the wort and get dissolved.

A large reaction surface is very important if the wort is to absorb the oxygen efficiently. This is one of the many reasons why an independent examination and assessment carried out on several different aeration devices gave top marks to the GEA Brewery Systems unit. The system is the standard for obtaining the optimum yeast flotation and activity, and more precise fermentation curves. This guarantees superior quality beer.

Design

• Completely pre-assembled system in compact design with electrical and pneumatic installation;
• Simple installation - installation and commissioning can be done by the customer;
• Fine and even introduction of air into the cold wort through an annular gap nozzle;
• Two wort aeration units connected in parallel for higher throughputs.

Technical data

Sizes (wort pipe): DN 25 to DN 125
Wort flow velocity: 1.0 to 2.5 m/s
Pressure drop in the wort pipe: < 1.0 bar
Residual oxygen concentration: 5 to 12 mg O² / l (26ppm)
Sterile air pressure: 6.0 to 8.0 bar Ü
Product flow rate: up to 1250 hl / h